As such, not all modem or routers are compatible with Unifi. In layman terms, using the Easy Smart Switch from TP-Link allow you to use any router in the market even those without Unifi mode in the firmware.
How to make Unifi AP’s Work with a Cisco Switch with VLAN’s
The build quality is amazing for something cost less than RM It is metal and feels really solid in hand. The model I have is the 5 ports model and every single port have their own LED status indicator.
The switch can be wall mounted with a lock port at the back. TP-Link also produces a 8 ports and 16 ports version of this model. By default, the switch will function like any other dumb switch. In order for the Switch to function as desired, you have to configure it to trunk the relevant VLAN to the relevant switch port. To configure the switch, you will need to gain access the Web UI of the switch. You can do that by configuring the IP manually on your computer and connect it to any port on the switch.
You will be able to access the web UI of the switch at The authentication ID and Password is admin. You can just copy my exact configuration but few free to play around with the settings. You have to enable You can just follow my screenshot as above. They are self-explanatory. Do not select any Unifi profile if available! Nothing need to be done on the HyppTV, it should work properly immediately. Does it work? Yes, it certainly does.
Think about this, you can now buy any routers without thinking about Unifi compatibility anymore. Furthermore, the HyppTV connection is offloaded at the Switch level, reducing the load at the router and clearing out 1 LAN port from your router.The switches are fully manageable, delivering robust performance and intelligent switching for your networks.
The USW is an 8-port gigabit switch with four Its auto-sensing PoE ports deliver up to Perfect for cleanly adding Ethernet ports where needed, with passthrough to keep your PoE device powered. The new 8-port models feature Gigabit Ethernet ports in a compact form factor. For its total, non-blocking throughput, each UniFi Switch supports up to 8 Gbps.
The UniFi Switch offers the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss, with a switching capacity of 16 Gbps. A single instance of the UniFi Controller running in the cloud can manage multiple UniFi sites within a centralized interface. Each site is logically separated and has its own network monitoring, configuration, maps, statistics, and admin accounts. Find a Reseller. Non-Blocking Throughput The new 8-port models feature Gigabit Ethernet ports in a compact form factor.
Switching Capacity The UniFi Switch offers the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss, with a switching capacity of 16 Gbps. Seamless Integration A single instance of the UniFi Controller running in the cloud can manage multiple UniFi sites within a centralized interface. Model Comparison. Total Non-Blocking Throughput. Gigabit RJ45 Ports. Switching Capacity. Power Consumption.So far I am pretty happy.
I really like having one central management page for all my AP's. I saw that and have the SSID's set that way. The problem comes when I set the switch port to trunk.
I am no longer able to see the AP. That one should work because it is effectively working the same as the "access vlan 10" command except that it allows tagged frames. Change to the change. I am able to access the AP now. I am able to get an IP. It is, however, the wrong IP. On the unifi controller, you need to add the correct vlan to the guest SSID.
HDHomerun with Unifi setup and VLANs?
Whatever that may be. Make sure it isn't set as native also. I did. To recap for anyone else that stumbles across this in the future. To continue this discussion, please ask a new question. Get answers from your peers along with millions of IT pros who visit Spiceworks.
Where am I going wrong? Best Answer. Try this on that port Text. Popular Topics in Wireless. Which of the following retains the information it's storing when the system power is turned off?This article will show you on how to turn a redundant desktop computer into a powerful Fibre broadband router.
Believe me, your old pc may be much better than an expensive router in term of performance. To give you an idea, an Intel celeron core 2 dual 1. An Intel LGA i3 3. Overall Diagram. You may be experiencing slow down when accessing this china website via google DNS.
Double click it to run. Point the image file to the img file that you have just downloaded. Please take note that the destination to write the img file must be an USB drive. Next, click Write. Set boot setting of the PC router to Legacy boot mode in Bios. Boot from the USB drive. Key in default lan1 ip address of your choice. This will be the default gateway Connect the setup as the overall diagram above. The hardware installation is done! Use the second computer that you have just prepared to log into this PC router using web browser.
Use the ip address you have just set for lan1. My choice was This is the first page you will see. If you wish the page to be displayed in English, you will have to use chrome web browser to translate the page right click on the empty space and click translate.
You have to make sure it is bound.
Leave other settings as default. Hit connect. It also works with china-brand routers. Imagine, you can now use all the routers from taobao. It supports a complete lineup of layer 2 features, including It is available from 11street, lelong, shopee or lazada Malaysia, RM Choose a port to connect from your pc to the switch.
Log in to the switch Feeding Ubiquiti Cameras into Blue Iris. Jan I have a rather long driveway, our upper half of the driveway is where my office and house are located.
The lower half houses an area for our growing animal population and parking. I have multiple VLANs, 1 of which is for my security cameras. This tutorial will assume that all of the hardware is in place and you are ready to make the secondary ethernet port on the NanoStation work on another VLAN. Give your VLAN a name and a number.
I chose You can then configure any other settings for your new VLAN that you may need. In my case, I only needed the basics. You want this if you wish to pass all of your VLANs over the bridge. Here you can configure your station with a static IP etc. For the purposes of this tutorial, we will assume you have already given your station a static IP address, gateway, mask, DNS and so forth.
After completing the setup of your first NanoStation, login to the web interface of the second NanoStation. This is where things get to be a little be more complex. This is the port we will be daisy chaining our camera off of. If memory serves me correctly, you must break the existing bridge to configure a new bridge. The final step before you can plug the camera in, is to enable POE Passthrough. Click the change button and you should now be able to power up your camera on a separate VLAN. You must be logged in to post a comment.
Simple VLAN Configuration On Mikrotik Router and Unifi AP Ubiquiti
I've tried opening up the firewall with logging enabled to see if there was some hidden port I was missing, which turned up nothing. I've tried enabling the MDNS reflector and setup the repeater as well, with no luck. I had an igmp-proxy setup at one point which didn't help either and I've honestly gotten rid of it as the broadcast-relay seemed be more reliable.
I've even tried setting up a port forward on port which I started fishing for something that might work. Putting both devices in the same L2 network doesn't help either as the Windows app doesn't seem to cache the IP address of the tuner, so as soon as I move everything back to different networks, the discovery breaks again.
At this point, I'm not really all that sure what else to check as these stupid fisher price multicast only setups are the bane of my existence. In any case, if any of you have any run into this prior and have some advice or any other suggestions, I would greatly appreciate it. Unfortunately, nothing in that post helps me as I've had vlans setup and working for over a year now and all of my other multicast devices work as well across subnets PS4, Sonos, Samsung soundbar.
I've also already tried using the igmp-proxy that was mentioned by Swynol in case it somehow had better luck over my broadcast-relay, but that didn't work out. It is specifically only the Windows app on my desktop that is giving me trouble.
This is the official SiliconDust app from the Microsoft Store. I am stubborn though and want my tech to work end to end as advertised, so I will put in the time and at least try and figure this out before I start settling. Posted 14 February - PM. No worries. Looking back in retrospect, I could see where someone might think I meant Emby Theater instead of the actual HDHomerun Windows app, so I clarified in my original post to avoid any future confusion.
Thanks in any case! Posted 16 February - AM. Just want to add for those in the future who might read this, it sounds like this is a current limitation of the Windows app.AggrInt1 is connected to a FortiGate that also have an aggregated interface.
All VLANs are set as corporate. Can someone please confirm and explain? Wired only "clients" for VLAN3 will be received by the switch. If true, then how? Link led indicators are active on both ports of each aggregated interface in every device. The IP Even though, I can ping all devices on the Again, I know that all others aggregated interfaces are working because I can ping everything from my computer except the FortiGate.
Not only that but on the HP switch I issued the command: display link-aggregation summary. On the Cisco switch I use the command: show interface port-channel 1 and on the Unifi switch the commands: telnet Everything seems to be in order.
On the Unifi switch the mac address of the switches and the FortiGate are listed. Here is an article I used in order to create switch port profiles. So I have a switch port profile that has my native network for network management then tagged vlans for Guest, IoT, and Testing networks. Hope this helps! It just looks like your switch is not tagging the traffic for VLAN5 and forwarding it untagged? Ubiquiti documentation is notorious for being lacking. It's one of the biggest gripes and lack of proper support from them.
That's why their devices are inexpensive I suppose.
There is a trade-off somewhere. It's only required if you want them to find the controller automatically. At that point the unifi DNS records isn't needed. With the record it simplifies life as you can just power it up and it'll show up automatically pending adoption. If you can't get to the controller's web GUI from anywhere else, that's a firewall issue. Either your Sophos firewall or the one built into the OS the controller runs on.
I breezed past this post once a day ago when I didn't have enough coffee. Edilcs messaged me to take a look. I don't see link aggregations stating what ports are together in the ubiquity configs. I just see the LAG interface definitions but not what ports are participating in each.
I've only done LAGs on Summit Extremes, you don't configure anything on the non-master group-member ports, they get the same vlans and other settings as the master. A lot of high end firewalls don't allow ping by default, and often don't allow much of anything by default except go out to the internet and get back data.
Some don't even start a service or you have to configure a service to answer even if you tell the firewall to allow it. I'm not sure if Fortigate rules can be made by zone, if so, set each internal zone as a trusted zone Or identify them separatelythen create rules to to allow to and from each other.
Otherwise if they are all identified as trusted, usually allow all trusted to trusted is a default rule.